Tiếng ViệtWithin the chemical industry, our equipment is widely used in processes involving chemical substances; from the loading, unloading and transfer of such substances until operations geared to the purification, recycling and recovery of highly corrosive chemical substances.
The scope of use in the chemical sector is wide-ranging: Producers of industrial chemical substances, oil refineries, oil and carbon by-products, cadmium products, plastic products, etc.
Centrifugal pumps EN 22858. PN Series
Horizontal centrifugal Pumps PN series according EN-22858, ISO-2858 are constructed in thermoplastic material for corrosive media and wide variety of industrial processes.
Materials
PP
PEH
PVC
PVDF
PTFE
Centrifugal pumps EN 22858 IN Series according to EN-22858, ISO-2858. are made of 1.4408 as standard material, they are designed to support the most varied assemblies of mechanical seals, as well as heating or cooling chambers at the front and/or back of the pump.
Materials
Special alloys available under request:
Stainless steel alloys; 1.4408, 1.4401
Close-coupled pumps. MPN Series
Close-coupled version anticorrosive pumps for a wide range of industrial processes. Their reliability and flexibility make them ideal for frequently used small and medium facilities. The MPN series can be dismantled without changing its location.
Materials
All wetted parts are of anticorrosive mateials such as:
PP
PEH
PVC
PVDF
PTFE
Close-coupled pumps. MPNS Series
The size of the body of the MPNS series pumps is in accordance with the EN 22858 and ISO 2858 standards. They are very sturdily built and easy to maintain as they can be dismantled without disconnecting the pipes or fastenings.
Materials
All wetted parts are of anticorrosive mateials such as:
PP
PEH
PVC
PVDF
PTFE
Close-coupled pumps. MIN Series
The size of the body of the MIN series pumps is in accordance with the EN 22858 and ISO 2858 standards. They are very sturdily built and easy to maintain as they can be dismantled without disconnecting the pipes or fastenings.
Materials
All wetted parts are of anticorrosive mateials such as:
AISI-316
AISI-304
Close-coupled pumps. MPF Series
Monobloc centrifugal pumps with different options in the suction and discharge connections of this series, which can be with flanges, for hose, smooth for gluing or welding, or threaded. The general application is the same as the MPN series with the difference that they have no metal support, making them lighter and less exposed to corrosive environments.
Close-coupled pumps. MP Series
Monobloc centrifugal pumps to pump acids, bases and chemical effluents. Suitable for low-volume processes, as they can be driven by single phase motors for applications requiring up to 2.2Kw of installed capacity.
Materials
All wetted parts are of anticorrosive mateials such as:
PP
PEH
PVC
PVDF
Vertical pumps. VPN Series
Very sturdily built vertical submerged centrifugal pumps with column lengths of up to 4.500mm providing great flexibility in managing the fluid levels of a tank compared to lower column lengths, as they provide the possibility of starting 100mm above the level of the pump body.
Materials
All wetted parts are of anticorrosive mateials such as:
PP
PEH
PVC
PVDF
PTFE
GRP
Vertical pumps. VPN-MS Series
Vertical submerged centrifugal pumps in thermoplastic materials for mid-range flow rates and discharge pressures; sturdily built with column lengths of up to 1.500 mm.
Materials
All wetted parts are of anticorrosive mateials such as:
PP
PEH
PVC
PVDF
PTFE
Vertical pumps. VPN-ML Series
Vertical submerged centrifugal pumps in thermoplastic materials for small and mid-range flow rates and discharge pressures; sturdily built with column lengths of up to 800 mm.
Materials
All wetted parts are of anticorrosive mateials such as:
PP
PEH
PVC
PVDF
PTFE
Vertical pumps. VIN Series
Very sturdily built vertical submerged centrifugal pumps with column lengths of up to 4.500mm providing great flexibility in managing the fluid levels of a tank compared to lower column lengths, as they provide the possibility of starting 100mm above the level of the pump body.
Materials
Special alloys available under request.
Stainless steel alloys; 1.4408, 1.4401…
Special alloys Hastelloy
Carpenter
Uranus
Vertical pumps. VIN-MS Series
Vertical submerged centrifugal pumps in thermoplastic materials for mid-range flow rates and discharge pressures; sturdily built with column lengths of up to 1.200 mm.
Materials
Special alloys available under request:
Stainless steel alloys; 1.4408, 1.4401…
Special Hastelloy alloys
Carpenter
Uranus
Self-priming Pumps. PNA series
Self-priming centrifugal pumps, EN-22858 and ISO-2858, give PN type units the capacity to suck to a depth of up to 3 m. with no need for foot valve.
Materials
All wetted parts are of anticorrosive mateials such as:
PP
PEH
PVC
PVDF
PTFE
Self-priming Pumps. MPNA series
MPNA series pumps are one-stage self-priming pumps for pumping ACIDS, BASES and CHEMICAL EFFLUENTS.
Self-priming Pumps. MPNSA series
MPNSA series pumps are one-stage self-priming pumps for pumping ACIDS, BASES and CHEMICAL EFFLUENTS, whose support size allows for larger pumps and motors and therefore higher flow rates and discharge pressures than the MPNA series.
Self-priming Pumps. MPA series
One-stage self-priming monobloc pump for pumping ACIDS, BASES AND CHEMICAL EFFLUENTS.
Suitable for low-volume processes, as they can be driven by three-phase and single phase motors for applications requiring up to 2.2Kw of installed capacity.
Due to its small size it is easily portable.
PNC Series
Centrifugal pumps according EN-22858 and ISO-2858 designed especially for emptying large lorry tanks; as the pump eliminates air entering mixed with liquid. The safety chamber by these units can be an added value in discharge processes, since in the event of depletion of the tank to be discharged the pump chamber conveys the liquid remaining in the pump chamber for a maximum of 7 minutes, giving enough time to stop the unit and thereby prevent the damage typical of dry operation, to which thermoplastic units are particularly sensitive.
Bơm
Unloading pumps. MPNC series
Monobloc version anticorrosive pumps for a wide range of industrial processes. Their reliability and flexibility make them ideal for frequently used small and medium sized facilities.
Unloading pumps. MPNSC Series
Centrifugal pumps especially designed for emptying large tanks; as the pump eliminates air entering mixed with liquid. The safety chamber by these units can be an added value in discharge processes, since in the event of depletion of the tank to be discharged the pump chamber conveys the liquid remaining in the pump chamber for a maximum of 7 minutes, giving enough time to stop the unit and thereby prevent the damage typical of dry operation, to which thermoplastic units are particularly sensitive.
INBEAT designs and manufactures various types of medium and large scale vertical mixers, with special adaptations according to the needs of our customers. Our mixers are designed with axial profiles, suitable for material stirring and mixing operations such as homogenization, mixing, dissolution, dispersion, suspension, reaction, heat transfer and, in general, processes requiring the uniform distribution of the materials submitted to treatment.
Standard profiles are with propellers, turbines with straight blades and turbines with warped profiles.
All parts in contact with the processed products are corrosion resistant.
The turbines are made with fibreglass-reinforced polyester resins, with PVDF, PP, PE, PVC, etc. type thermoplastic and in stainless metal alloys. The shafts are metal and coated with corrosion resistant materials.
The turbines are replaceable, with the possibility of changing position, material or design according to the requirements of the process.
