FLAMEVision FV300

FLAMEVision FV300 uses Infra-Red Array based sensing technology to provide the ultimate programmable flame detector. An array of 256 infra-red sensors plus two optical channels view the protected area. Powerful algorithms running on a Digital Signal Processor (DSP) are tuned to the characteristics of a fire and analyse the signals from these channels to quickly […]

VESDA ECO Gas Detection

The VESDA ECO is a gas detector module that is inserted into the pipework of a VESDA aspirating smoke detector. Different VESDA ECO models detect different gasses. Applications VESDA ECO by Xtralis provides protection from both fire and gas threats in powerful yet cost effective configurations to provide point, zone or total area coverage in […]

Gas flooding system

Gas flooding system For over 70 years, Tyco Marine Services has been a preferred supplier of gaseous fire suppression systems to the Marine industry. Today, our inert and chemical gaseous fire suppression systems offer a long term, sustainable solution for protecting a wide range of areas within a ship such as “Critical Equipment Rooms” involving […]

Series 600 Conventional detector

Tyco’s conventional detector design evolution has resulted in the creation of a new Series 600 range of unobtrusively styled detectors, incorporating a number of unique design features enabling improved operation, installation and ease of servicing. Through innovative design Series 600 detectors have the ability to reduce installation and servicing time to a minimum, needing only […]

Conventional Marine Control Panel

Overview The T1200 range of conventional marine panels has been designed and built in the UK to meet approvals from many major Marine Authorities (Lloyds, BV, GL, ABS, DNV & RMRS). These products are fully tested & approved to the mandatory requirements of EN54-2 & 4, SOLAS 74 and Lloyds ENV2 environmental classification. These panels […]

Banshee Excel Sounders

The Banshee Excel sounder replaces the Banshee Multi Tone range of Sounders. It uses the same technically superior rocking arm transducer to reproduce the familiar 32 tones of the previous Banshee and Bedlam ranges. Technical Specification Approvals: LPCB & VdS approved to EN54-3 Tones available: 32 Operating voltage: 9-30Vdc Flash current consumption: 40mA Operating temperature […]

Electronic Solenoid Bell

Unique patented alarm bell with miniature solenoid andintegrated electronic control. No backbox required for surface wiring. Technical Specification Dimensions: 6” diameter Voltage: 18-30Vdc Typical Current: 24Vdc@30mA Typ. Sound Output: 94dB (A)@1m Share +1 Tweet Share Pin StumbleShares 0

6” & 8” Motorised Bells

Features CE marked Low current 6” bell (ONLY 11mA) Low cost Extra high 95dBA/m Slim profile (53mm) Fully suppressed and polarised Quick and easy to install LPCB approved to EN54 Pt 3 Share +1 Tweet Share Pin StumbleShares 0

6” Red Solenoid Operated Friedland Bell

The bells are the underdome type, with a high resonance pressed alloy-steel gong to ensure a loud clear ring tone. The operating mechanism is fully enclosed and the gong is red stove enamelled for long life.  The bells are designed for internal use, but gasket sealed conduit boxes can be provided for external use. Share […]

Sounders & Beacons

A range of sounders to meet a wide variety of alarm applications where loud, penetrating and distinctive warnings must be given to alert people of fire situations. In addition, multi-tone electronic sounders can give a variety of sounds to signal other conditions e.g.“extinguishing gas release imminent,” etc. Share +1 Tweet Share Pin StumbleShares 0